4 Replacement Procedures
4.18 Membrane Power Board
NOTE:
Please reuse the membrane power board. If the membrane power board is damaged, use a
replacement.
Removing the Membrane Power Board
Remove the membrane power board according to the following procedures and Figure 4.34.
1. Gently peel the membrane power board from the logic lower assembly, as indicated in
Figure 4.34.
Installing the Membrane Power Board
Install the membrane power board according to the following procedures.
1. Adhere the membrane power board to the correct position on the logic lower assembly.
Satellite M600/M640/M645/M647 Maintenance Manual
Figure 4.34 Removing the membrane power board
4.18 Membrane Power Board
4-50