Cleaning And Caring For You Wine Cooler - Baumatic BWE40 Instruction Manual

Cleaning and caring
for your Wine Cooler
~
Unplug the power source before cleaning your Wine Cooler.
o
~
Make sure that no grease or oil comes into contact with the door
o
seals as this could make them porous over time and subject to
cracking.
~
Wash the inside with a solution of warm water and baking soda.
o
This solution should be about 2 tablespoons of baking soda to a
quart (946ml) of water.
Wash the shelves and trays with a mild detergent solution.
o
The outside of your Wine Cooler should be cleaned with mild
o
detergent and warm water.
From time to time, you may have to wipe the bottom part of the
o
storage area, as your Wine Cooler is designed to retain
humidity, and condensation may collect there.
~
Never let the door seals get dirty or become pitted with dirt.
o
Apart from posing a health risk, a dirty seal could let cold air
escape from your wine cooler, thus making it less energy
efficient.
~
If you are going to be away for an extended period, unplug your
o
Wine Cooler and:
Clean your Wine Cooler thoroughly
Leave the door open to prevent moisture from
causing odours and mould
To replace your Wine Cooler's light bulb, firstly unplug your Wine
o
Cooler or disconnect the power it feeds from at the mains.
Failure to do this could result in electric shock. The light bulb
should not be more than 10 watts.
Your Baumatic BWE40 Wine Cooler
Remove bottles
12