Using The Sleep Timer - JVC LVT0100-001B Instructions Manual

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off
by itself rather than play all night.
On the front panel only :
1. Press SETTING so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # #
buttons work for setting the Sleep Timer.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until "SLEEP" appears on the
display.
3. Press Control @ @ @ @ @ / # # # # # to set the shut-off time.
The SLEEP indicator lights up on the display.
Each time you press the button, the shut-off time on the
display changes as follows:
10 20
When the shut-off time comes
The receiver turns off automatically.
To check or change the time remaining until the shut-off time
1. Press SETTING, if necessary, so that the Control % / fi / @ / # buttons work for
setting the Sleep Timer.
2. Press Control % / fi, if necessary, until "SLEEP" appears on the display.
3. Press Control @ / #.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press Control @ / # repeatedly.
To cancel the Sleep Timer
Press Control @ / # repeatedly in step 3 above until "0" appears on the display. (The
SLEEP indicator goes off.)
Turning off the power also cancels the Sleep Timer.
30 40 50
0
(Canceled)
SETTING
60 70 80
14