System - D-Link DAP-1320 User Manual

Section 3 - Web-based Configuration
This page allows you to save or restore your system configuration, reset or reboot the DAP-1320. After making your changes,
click the Save.Settings button.
Save Settings Save the system settings onto a file to the local hard drive.
To Local Hard You will then see a file dialog where you can select a location
and file name for the settings.
Drive:
Load Settings
From Local
Load the system settings from a file on the local hard drive.
Hard Drive:
Restore
to Factory
Restore the system settings to factory default settings.
Default
Settings:
Reboot the
Click Reboot to reboot the DAP-1320.
Device:
Clear
If you have previously installed a Language Pack, you can
Language
remove it by clicking Remove.
Pack:
D-Link DAP-1320 User Manual

System

30