Brother MFC-8880DN Quick Setup Manual page 17

Wired Network
For Wired Network Interface Users
®
(Mac OS X 10.3.9 or greater)
15
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
be logged on with Administrator rights.
16
Connect the network
cable
a
Connect the network interface cable to the LAN
connector marked with a
connect it to a free port on your hub.
17
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
c
The Brother software will search for the Brother
device. During this time the following screen
will appear.
d
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
®
is ON. You must
symbol and then
Macintosh
Note
• If your machine is not found over the network,
confirm your network setting.
• If this screen appears click OK.
• Enter a name for your Macintosh
Display Name up to 15 characters long and
click OK. Go to e.
• If you want to use the machine's Scan key to
scan over the network, you must check the
Register your computer with the "Scan To"
function on the machine box.
• The name you enter will appear on the
machine's LCD when you press
choose a scan option. (For more information,
see Network Scanning in the Software User's
Guide on the CD-ROM.)
e
When this screen appears, click OK.
The installation of MFL-Pro Suite is now
complete.
Go to step 18 on page 18.
®
®
in
and
17