D-Link TL-WR841N Quick Installation Manual

Quick Installation Guide

300Mbps Wireless N Router
TL-WR841N/TL-WR841ND
MODEL NO.
2
Connecting by Easy Setup Assistant
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing Linux /Mac or without CD-ROM, Please refer to Appendix 1.
1 Insert the TP-LINK resource CD into the CD-ROM drive.
Here we take TL-WR841ND for example. Select 'TL-WR841ND'
2
and click 'Easy SetupAssistant'.
7106503292

Package Contents

TL-WR841N/TL-WR841ND Power Adapter
300Mbps Wireless N Router
MODEL NO. TL-WR841N/TL-WR841ND
Ethernet Cable Resource CD QIG
System Requirement
· Windows 7 · Windows Vista · Windows XP · Windows 2000
3 After con rming the hardware connection and the status
of LEDs, Click 'NEXT' to continue.
After the connectivity is checked successfully, please click
4
'NEXT'.
1

Hardware Connection

Cable/DSL Modem
Internet
Connect the WAN port on your Router to the Modem's LAN port with an Ethernet cable.
1
Connect your computer to any Port labeled 1~4 on the Router with an Ethernet cable.
2
Plug the provided Power Adapter into the Power jack on the back of the Router and the other end to a standard electrical Wall socket.
3
Press the ON/OFF button to power on the Router.
5 Select the connection type your ISP provides and click 'NEXT'.
Here we take 'PPPoE' connection for example.
Enter the 'User Name' and 'Password' provided by you ISP
6
and click 'NEXT'.
3
2
1
7 Create a unique or easy-to-remember name for your
wireless network. You can also keep the default setting.
Click 'NEXT' to continue.
You are recommended to select 'Most Security
8
(WPA2-PSK)' to secure your wireless network. Enter
a key of 8 ~ 63 characters and click 'NEXT'.
(Turn over)