Datum Points - Subaru Legacy 2003 Service Manual

2. Datum Points

A: LOCATION
NOTE:
• Datum points are specified for body repair.
• Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment
accuracy.
• Both right and left reference points are symmetrical.
1. ROOM SECTION
(13) Front fener attaching hole at front
pillar center portion M6
(14) Front fender attaching hole at
front pillar lower portion M6
(19) Retainer attaching hole at side rail
outer 3.2 mm (0.126 in) dia.
(20) Center pillar outer hole 14 mm
(0.55 in) dia.
(21) Front seat belt adjust plate attach-
ing hole M10
(22) Side sill outer hole 20 mm (0.79
in) dia.
DATUM POINTS
(21)
(23) Rear quarter outer door switch
attaching hole 20 mm (0.79 in)
dia.
(64) Center pillar (LWR) gauge hole 16
mm (0.63 in) dia.
(81) Panel rear center (UPR) gauge
hole 8 mm (0.31 in) dia.
(82) Bulk head rear trim clip hole 7 mm
(0.28 in) dia.
(85) Rear quarter outer gauge hole 20
mm (0.79 in) dia.
BS-3
BODY STRUCTURE
(19)
(81)
(88)
(92)
(64)
(13)
(14)
(87) Six light glass attaching hole 6.2
mm (0.244 in) dia.
(88) Retainer attaching square hole at
side rail outer 8 × 8 mm (0.31 ×
0.31 in)
(89) Retainer attaching square hole at
rear quarter outer 8 × 8 mm (0.31
× 0.31 in)
(92) Rear panel center hole (UPR) 6
mm (0.24 in) dia.
(89)
(87)
(23)
(85)
(82)
(20)
(22)
BS-00064