Subaru Legacy 2003 Service Manual page 12

BODY STRUCTURE
3. Datum Dimensions
A: MEASUREMENT
Refer to LOCATION for details on measurement
points. <Ref. to BS-3, LOCATION, Datum Points.>
NOTE:
• Using a tram tracking gauge, measure all the di-
mensions.
• When using a tape measure, carefully measure
dimensions without letting the tape measure sag or
twist.
• Measure the linear dimensions between cores of
holes.
• Suffixes "RH" and "LH" indicate right-hand and
left-hand.
( 1 )
(1) Tram tracking gauge
• Measure at the center of the circle around the
outside of the body panel.
( 3 )
( 4 )
(1) Outside
(2) Inside
(3) Datum point
(4) Body panel
DATUM DIMENSIONS
BS-00097
( 1 )
( 2 )
BS-00098
BS-10