Operator Controls - Bresser GameCam 120 Instruction Manual

As a rule, the game will not notice the infrared
lighting. The spots illuminated around the camera
are also invisible to the naked human eye.
F
Red LED power indicator
This LED blinks for approximately one minute
when the camera is in switched on. When the
blinking stops, the wildlife camera has completed
its standby time and will now take photographs or
videos according to the camera settings.
G
Padlock eyelet
A padlock* can be inserted through this eyelet for
additional security.
H
Casing latch
The casing of the wildlife camera can be opened
at the casing latch with its metal staple, in order
to gain access to the operator controls and the
battery compartment inside.
I
Connection socket for external 6V DC
power supply (power supply unit and mains
adapter not supplied)
28
J
Tripod connection socket;
Standard 6.35 mm (0.25") tripod thread

2 Operator controls

The following operator controls are located inside
the wildlife camera:
1)
Arrow keys
1!
"OK" key
1@
"M" key
1#
"ESC" key
1$
Display
1%
"ON/OFF" button
3 Connections and battery
compartment
Access to these connections (16-18) and the
battery compartment (19) is by releasing the
casing latch (7) on the side of the wildlife camera
and opening the camera.
1^
SD card slot (for SD cards* up to a maximum
of 16 GB memory capacity)
(Fig. 3)
(Fig. 4+5)
*not supplied