Bresser GameCam 120 Instruction Manual page 14

item, pressing the "OK" key saves your current
setting and you are taken to the next higher level
in the menu (not when setting the date or time).
Press the key to return to the main screen (not
when setting the date or time). By pressing the
"M" key, you are taken from any display to the
setup menu (except for the password prompt and
the image preview).
To be able to use the Photo / Video functions, an
SD memory card must be inserted beforehand.
6.2 "Settings" Menu Item
The most important parameters for the camera
can be entered under "Settings". The respective
selected menu item or submenu item is indicated by
blue highlighting. Exit the "Settings" menu by using
the key.
The following menu items are available:
6.2.1 Operating Range (Work)
Here, you can choose between the following
operating modes: 24 hours, Day, Night
6.2.2 Delay
Here, you can set activation intervals between
direct recording after the fi rst movement and the
next activation.
1, 3, 5, 10, 15, 30 minutes
6.2.3 Multi-shot
Here, you can select the number of shots to be
taken in succession in photo mode, without the
motion sensors having to detect a movement
again:
1, 2, 3, 4, 5 or 6 successive images
6.2.4 Video length
Here, you can set the length of the video to be
recorded: 10, 20, 30 sec.
6.2.5 Video resolution
Select the resolution of the video in video mode here:
QVGA (320 x 240 pixels [30 FPS])
VGA (640 x 480 pixels [15 FPS])
GB
33