Main Menu - Panasonic Digital Palmcorder PalmSight PV-DV100 Service Manual

SET UP OF PC-EVR ADJUSTMENT
PROGRAM
1. Turn on the Personal Computer.
®
Windows 95 will be set up automatically.
2. Restart it in MS-DOS mode.
3. Change the current directory to the one including the PC-
EVR Adjustment Program and start up the PC-EVR Adjust-
ment Program as follows.
1) If MS-DOS is Japanese mode, input "us," and then press
"ENTER" key to be US mode on.
C:Ywindows>us
Fig. E4-1
2) Input "cd \ ," and then press "ENTER" key to change
the directory to the one including the PC-EVR Adjustment
Program.
C:\windows>cd \
Input directory name
including the PC-EVR
Adjustment Program.
Fig. E4-2
3) Input "kdv2000," and then press "ENTER" key to start up
the PC-EVR Adjustment Program.
C:\ >kdv2000
Fig. E4-3
"Select Model Number Menu" will be displayed.
4. Select the model number which you are servicing, and then
press "Enter" key. The starting display will be displayed.
5. Perform set up items according to menu until "Main Menu"
is displayed.
6. Select "Sub Menu" to adjust or check, etc. the camcorder.
Input
Input
HOW TO USE MAIN MENU

Main Menu

Select a Sub Menu to check, adjust the unit etc. by pressing
(UP/DOWN) Key in Main Menu. Then, press "ENTER"
Key. The Sub Menu will be displayed.
Note:
Menu 4 through 7 are needed for adjustment.
Main menu Camera check menu Video check menu Camera adjustment menu
1. VTR MPU version number (for reference). 1. Replaced Parts, symptoms and necessary 1. Replaced Parts, symptoms and necessary 1. Hall Amp adjustment 1. Sensitivity adjustment of Tape beginning/ 1. PLL adjustment
adjustment adjustment 2. Iris PWM adjustment Tape END sensors 2. Clamp Level adjustment
2. Check [ Video ].
2. EEPROM/RAM Editor 2. EEPROM/RAM Editor 3. Write Lens data 2. Luminance level adjustment 3. Pedestal Level adjustment
3. Check [ Camera ].
3. Read (Save)/ Write All EEPROM data 3. Read (Save)/ Write All EEPROM data 4. Linear MR adjustment (Auto) 3. Color level adjustment 4. Contrast adjustment
4. Adjust [ Video ].
4. Outer control 4. Outer control 5. Zoom tracking adjustment (Auto) 4. Video VCO adjustment 5. Gamma adjustment
5. Adjust [ Camera ].
5. Back focus check 6. AGC adjustment 5. PG shifter adjustment (Auto) 6. Level adjustment
6. Adjust [ LCD ].
6. Auto white balance check 7. AD Input level adjustment 6. RF/ VITERBI adjustment (Manual/ Auto) 7. Color Level adjustment
7. Adjust [ Color EVF ].
7. Auto check, (Lens drive) 8. White balance adjustment (Phase and Gain) 7. Recording current set up 8. Level adjustment
8. Enter/Release TEST MODE
9. Color gain calculation (Auto) 8. Calender/ Clock set up 9. COM Level adjustment
9. Information. (N/A)
10. Menu Set up (For reference) 9. Write products ID 10. COM bias adjustment
10. Display Title screen.
11. White balance adjustment
11. Restat system.
12. END.
With using key, you can also see sub menu in order.
Camera
Main
check
menu
menu
Video
adjustment
menu
Note:
The adjusted data is stored to EEPROM IC after each
adjustment.
1
When LISTA adjusting, select "Enter TEST MODE" in
"Enter/Release TEST MODE" menu, and enter the TEST
MODE.
After LISTA adjustment is completed, select "Release
TEST MODE" in "Enter/Release TEST MODE" menu, and
release the TEST MODE.
3-8
Video adjustment menu LCD adjustment menu LCD adjustment menu
1. PLL adjustment
2. Clamp Level adjustment
3. Pedestal Level adjustment
4. Contrast adjustment
5. Gamma adjustment
6. Level adjustment
7. Color Level adjustment
8. Level adjustment
1
9. COM Level adjustment
10. COM bias adjustment
11. White balance adjustment
Fig. E5-1
Video Camera
check adjustment
menu menu
LCD EVF
adjustment adjustment
menu menu
Fig. E5-2