Panasonic Digital Palmcorder PalmSight PV-DV100 Service Manual page 54

Tension Drive Arm, S Brake Drive Lever
Mode Switch
28 Tension Drive
Arm
Cam Gear
29 S Brake Drive
Lever
Intermediate Gear
outside groove
inside groove
Cam Follower Pin
Cam Follower Pin
Fig. DM22
Reassembly Notes:
1. Installation of S Brake Drive Lever, Tension Drive Arm
1) Confirm that the Intermediate Gear, Main Plate Unit,
Mode Switch, and Cam Gear are in proper position.
(Refer to next page.)
2) Install the S Brake Drive Lever so that the Cam Follower
Pin on S Brake Drive Lever is inserted to outside groove
on the Cam Gear.
3) Install the Tension Drive Arm so that the Cam Follower
Pin on Tension Drive Arm is inserted to inside groove on
the Cam Gear.
2-40
Main Plate Unit