AC ADAPTOR SECTION
DISASSEMBLY/ASSEMBLY PROCEDURES
Disassembly Flowchart
This flow chart indicates the disassembly steps of the cabinet
parts and the P.C. Boards in order to gain access to item (s) to
be serviced. When reassembling, perform the step (s) in the
reverse order. Bend, route and dress the wires as they were
originally.
CAUTION:
Disconnect the AC Plug before disassembling.
1 Bottom Case
2 AC Adaptor C.B.A.
3 Top Case Unit
Fig. DA1
Disassembly Method
STEP
PART
/LOC.
No.
1
Bottom Case
2
AC Adaptor C.B.A.
3
Top Case Unit
A
B
How to read chart shown above:
A: Order of Procedure steps.
When reassembling, perform steps(s) in reverse order.
These numbers are also used as the identification (location)
No. of parts in Figures.
B: Part to be removed or installed.
C: Fig. No. showing Procedure or Part Location.
D: Identification of part to be removed, unhooked, unlocked,
released, unplugged or unsoldered.
2(S-1) = 2 Screws (S-1), 4(L-1) = 4 Locking Tabs (L-1)
(S-1)
(L-1)
Note:
Work carefully so as not to break 4 Locking Tabs (L-1).
9-1
Fig.
REMOVE
No.
DA2
2(S-1), 4(L-1)
--------
DA2
DA2
--------
C
D
1 Bottom Case
2 AC Adaptor
C.B.A.
3 Top Case Unit
Fig. DA2