Section Five - Appendix; Specifications - DigiTech RP500 Owner's Manual

Section Five - Appendix

Specifications
General Specifications
A/D/A Converter:
Sampling Frequency:
DSP Section:
Simultaneous
Preset Memory:
Dimensions:
Unit Weight:
Analog Input Connections:
Guitar Input:
Input Impedance:
CD/MP3 Input:
Analog Output Connections:
1/4˝ Outputs
Left/Right Outputs:
Left/Right Output Impedance:
Maximum Output:
XLR Outputs
Left/Right Outputs:
Left/Right Output Impedance:
Maximum Output:
Headphones:
Digital Connections:
Universal Serial Bus (USB):
RP500 USB Recording Specifications:
Sample Rate:
Bit depth:
Power Requirements:
US and Canada:
Japan:
Europe:
UK:
Minimum Windows PC Computer System Requirements:
®
Vista Home/Premium, XP Home/Professional (SP 2 installed, .NET Framework 2.0* installed)
800 MHz processor speed (1.2 GHz recommended)
512MB RAM (1GB recommended)
* .NET 2.0 will be installed during installation of X-Edit software if required on XP systems
Minimum Mac Computer System Requirements:
OS 10.4.x, 10.5
PowerPC or Intel G4, G5 processor 800 MHz (1.2 GHz
®
recommended)
512MB RAM (1GB recommended)
28
24-bit high performance audio
44.1 kHz
AudioDNA2™ DSP Processor
Effects: 10
100 User Presets (1-00) / 100 Factory Presets (F1-F00)
19.5˝ Length x 8.625˝ Width x 2.75˝ Height
6.6 lbs.
1/4˝ Unbalanced (TS)
500k Ohms
1/8˝ Stereo (TRS)
1/4˝ Impedance Unbalanced
500 Ohms per side
+10 dBu
Balanced
1 kohm per side
+16 dBu
1/8˝ Stereo (TRS) – 13.6mW per channel @ 50 Ohms
Type B, supports USB1.1 Full Speed (12 Mbps Bandwidth USB 2.0 compatible)
44.1 kHz
supports 16-bit or 24-bit (depends on setup in Recording Software)
120 VAC, 60 Hz Adapter: PS0913B-120
100 VAC, 50/60 Hz Adapter: PS0913B -100
230 VAC, 50 Hz Adapter: PS0913B -230
240 VAC, 50 Hz Adapter: PS0913B -240