Configure The Dfnt Client 151 Module; Complete The Prosoft Configuration Builder Sections - ProLinx 6201-WA-DFNT to DFNT Setup Manual

Configure the DFNT Client 151 Module

4 Configure the DFNT Client 151 Module
In This Chapter

Complete the ProSoft Configuration Builder Sections ........................... 23

Save and Download the Configuration File to the 6201-WA-DFNT Client
151 ........................................................................................................ 31
Configuring the Remote Client is done the same way as the Primary Client with a
few exceptions outlined in this section.
Remove the cable from the Debug port of the DFNT Client 150 module and
1
plug it into the Debug port of the DFNT module to be configured as Client
151.
With PCB open, expand the 6201-WA-DFNT_151 module selection.
2
4.1 Complete the ProSoft Configuration Builder Sections
4.1.1 Radio Ethernet Configuration
Double click on the
1
ProSoft Technology, Inc.
August 12, 2008
6201-WA-DFNT ♦ ProLinx Wireless
High Speed Wireless EtherNet/IP Gateway
selection.
Page 23 of 45