Table of Contents
Advertisement
Default Module Configuration Assignments
6
Default Module Configuration Assignments
In This Chapter
IP Addresses ......................................................................................... 35
WATTCP Parameters............................................................................ 35
6.1
IP Addresses
IP Address are assigned in ranges to each of the WA modules. This information
is used in the Radio Ethernet Configuration section of the configuration file. The
following table shows the range assignments and the default value pre-
configured in the module:
Module
6105-WA-PDPM
6104-WA-PDPS
6201-WA-MCM
6201-WA-MNET
6201-WA-DFCM
6201-WA-DFNT
6201-WA-ASCII
6201-WA-104S
6201-WA-DEM
6201-WA-RIO
6303-WA-MBP
The purpose for reserving up to 10 IP addresses per module is for addressing
and establishing radio communications between modules of the same model
number (for example 6201-WA-DFNT to 6201-WA-DFNT).
6.2
WATTCP Parameters
The following default parameters are applicable to all WA modules:
Radio_Subnet_Mask :
Radio_Default_Gateway:
ProSoft Technology, Inc.
August 12, 2008
IP Address Range
172.16.10.100 - 172.16.10.109
172.16.10.110 - 172.16.10.119
172.16.10.120 - 172.16.10.129
172.16.10.130 - 172.16.10.139
172.16.10.140 - 172.16.10.149
172.16.10.150 - 172.16.10.159
172.16.10.160 - 172.16.10.169
172.16.10.170 - 172.16.10.179
172.16.10.180 - 172.16.10.189
172.16.10.190 - 172.16.10.199
172.16.10.200 - 172.16.10.209
255.255.255.0
172.16.10.1
6201-WA-DFNT ♦ ProLinx Wireless
High Speed Wireless EtherNet/IP Gateway
Address Set in the Module (Default)
172.16.10.100
172.16.10.110
172.16.10.120
172.16.10.130
172.16.10.140
172.16.10.150
172.16.10.160
172.16.10.170
172.16.10.180
172.16.10.190
172.16.10.200
Page 35 of 45
Advertisement
Table of Contents
