Motorola A830 User Manual page 111

Note: Not all devices are compatible with Bluetooth, infrared, serial
cable, or USB cable connections. Check your external device for
specifications.
Setting Up a Cable Connection
Attach a serial cable or Motorola Original USB cable to the phone
and external device as follows.
Note: Check your computer or hand-held device to determine the
type of cable you need.
Attaching a Serial Cable
Use the interchangeable head on the Motorola Multi-Connect Serial
Cable to connect a computer, Palm III device, or Palm V device to
your phone.
Do This
1 Plug the serial cable into the detachable head. Make
sure that the Motorola logo on the detachable head
and the metal shielding on the serial cable plug are
both facing you.
2 With the Motorola
logo and the phone
both facing you,
plug the detachable
head into your
phone's accessory
connector port.
3 Plug the other end of the cable into the serial
interface connection on the external device and
tighten the screws.
Note: To save phone power when using a serial cable, plug a
charger into the charger slot on the cable head.
Getting More Out of Your Phone - 111