Basic Disc Operations; Programming The Track Playing Order-Program Play - JVC UX-G3 Instructions Manual

To remove the disc, press ) OPEN on the unit, then take out
the disc by holding it at the edges while pressing the unit's
pivot lightly.
• If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no disc is inserted
"NO DISC" appears on the display.
DO NOT open the disc cover by hand as it will be
damaged.

Basic Disc Operations

While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD 3/8.
While pausing, the elapsed playing time flashes on
the display.
To resume playing, press CD 3/8 again.
To go to another track
Before or during play, press ¢ or 4 (or
UP ¢ or DOWN 4 on the unit)
repeatedly.
• ¢ (UP ¢):
Skips to the beginning of
the next or succeeding tracks.
• 4 (DOWN 4): Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or
during play allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press OVER,
then press 1, 5.
For track number 20, press OVER,
then press 2, 0.
(For MP3 disc only)
For track number 20, press OVER, then
press 0, 2, 0.
For track number 156, press OVER, then press 1, 5, 6.
To locate a particular point in a track
During play, press and hold ¢ or 4 (or
UP ¢ or DOWN 4 on the unit).
• ¢ (UP ¢):
• 4 (DOWN 4): Fast-reverses the
Programming the Track Playing Order
—Program Play
You can arrange the order in which tracks play before you
start playing. You can program up to 60 tracks.
On the remote control ONLY:
1
Place a disc.
• If the current source is not the CD player, press
CD 6, then 7 before going to the next step.
2
CD
Press PROGRAM.
3/8
The PRGM (program) indicator starts flashing
on the display.
UP
PRESET
GROUP
3
Press ¢ or 4 to select the
DOWN
PRESET
GROUP
track number, then press
PROGRAM.
Track number
You can also use the number button(s)
1 2 3 to select a track number.
• For the operation of the number
4 5 6
buttons, see "To go to another track
directly using the number buttons" on
7 8 9
the left column.
OVER
0
When you are programming from MP3 disc
Pressing PRESET GROUP
selects the first track of each group.
4
Repeat step 3 to program other tracks you
want.
Fast-forwards the
tracks.
tracks.
PRGM
Program step
number
PRGM
or PRESET GROUP
Continued
UP
PRESET
GROUP
DOWN
PRESET
GROUP
PROGRAM
UP
PRESET
GROUP
DOWN
PRESET
GROUP
PROGRAM
1 2 3
4 5 6
7 8 9
OVER
0
12