Yamaha YSP-1 Owner's Manual page 37

You can playback sound and/or images from the various
components connected to this unit simply by pressing one
of the input selector buttons (TV, DVD, VCR or AUX) on
the remote control.
To playback a TV program
Press TV.
TV
VOL
.....Hi _'"." ! ! "!"!'"."
,. =:'": :.: ,: :.,: _=:
To playback a DVD
Press DVD.
DVD
VOL
.' ,:"'," L,: ," :.,: ==:
To playback a video tape
Press VCR.
VCR
VOL
tJi2Fit =,
This section uses a DVD player as the playback
component (source).
For details on the TV and DVD player you are using, refer to the
owner's manual supplied with your TV and DVD player.
1
Turn on the power to your DVD player using
the supplied remote control.
2 Switch the video input on your TV using the
supplied remote control until the screen for
your DVD player is displayed.
3 If necessary, turn down the volume of your
TV until you cannot hear any sound.
4
Press DVD on the remote control.
The playback source for this unit switches to DVD.
DVD
5 Playback the DVD on your DVD player using
the supplied remote control.
Audio signals from your DVD player are output from
this unit's speakers.
_%,._
• If the output volume is too low, increase the volume on this unit
to around -25 dB.
• If you have set remote control codes for your TV and DVD
player, you can use this unit's remote control to operate these
components. For details on how to set remote control codes, see
page 51.
To playback a component connected to the AUX
jack
Press AUX.
AUX
VOL
i2i i i ':.:: "" i i 'T' "*"
31