Yamaha YSP-1 Owner's Manual page 28

IF._ t =l "._.'m gel=/ _ _R[eJl"4 h_[_ir_"lll : l : [e11A_l _lfcD11A_ l J
4
Press SELECT once more.
The parameters for the selected room type are loaded.
== i ,iUU_',{
LOgl) "" _ ,11...... ..f
I..l:iqii:R_. I .oit::_:i.l"d-_ !
Once the parameters are loaded, the display returns to
the following screen.
':,Li i'i_[iU
, EI:I:iP', '_ :!i;{U[LIP
, _#:_bLIF-_L :!71!7fl..IP
[::iqii:l. E l:::-[:i : Er&er
You can enjoy analog audio signals output by your TV in
real surround sound.
Before performing the steps below, set this unit's volume to
-40 dB. If necessary, adjust the volume level in step 4 below.
1
Select the TV channel you want to watch.
To select a TV channel, use the remote control
provided with your TV.
Press TV on this unit's remote control.
This unit outputs audio signals from your TV.
TV
5
Press SET MENU.
The SET MENU screen disappears from your TV.
SET MENU
If you can hear sound from your TV speakers,
reduce the volume level on your TV until you
can no longer hear any audio being output.
To reduce the TV volume level, use the remote
control provided with your TV.
To adjust the volume level, press
VOLUME +/- on this unit's remote control.
VOLUME
22