Agitator Brushes; Clean Out Dirt Tube - Hoover Concept One Instuctions

Clean out dirt tube.

To replace dirt tube, position over
lower seal and push down. Insert
one side against retention clips.
Push to snap other side into posi-
tion.

Agitator brushes

Disconnect cleaner from electri-
cal outlet before checking
brushes.
When brushes are worn and
bristles do not touch the edge of a
card held across the nozzle, they
should be replaced. Always re-
place both brushes at the same
time to maintain cleaning effec-
tiveness.
20