Connecting A Reference Video Signal - Sony MSW-M2100 Operation Manual

3-2 Connecting a Reference Video Signal

Connect a reference video signal as shown below.
Reference signal for video output and
servo system
The output from the internal reference video signal
generator is supplied to the output video signal and
servo circuits as a reference signal.
75 Ω termination switch: ON
REF. VIDEO
INPUT
MSW-M2100/M2100P/M2100E/M2100EP
Reference video signal
Video monitor
• SDI OUTPUT
• COMPOSITE
• COMPONENT
a)
a) The figure shows the MSW-M2100/M2100P.
External sync signal for the internal
reference video signal generator
The internal reference video signal generator is
synchronized to an input reference video signal.
3-5
Chapter 3 Preparations