Setting Up; Connecting The Speakers; Choosing Power Sources - Sony MEGA BASS CFD-540 Operating Instructions Manual

Setting Up
Connecting the Speakers
For easy transport, the dual speakers are detachable. Before
you begin listening to music, attach the speaker boxes and
connect the speaker plugs as shown below. Make sure you
turn off the power before making any connections.
1 Align the grooves and slide the speaker box down until
it snaps into place. @
2 Connect the right speaker plug to the RIGHT
connectors and the left speaker plug to the LEFT
connectors.
To detach the speakers
Unlock the speaker @ and slide the speaker box all the way
up and away from the player.
4| Setting Up
Choosing Power Sources
The CD cassette-corder has two separate power sources.
Use the AC power source (house current) whenever you
record because recording consumes the most power. Use six
size D (R20) batteries when the CD cassette-corder becomes
a portable.
Operating the player on AC power
Insert one end of the supplied power cord to the AC IN
socket located at the rear of the player @ and the other end
to the wall outlet ©.
to wall outlet
Operating the player on batteries
To play your CD cassette-corder on batteries, the AC power
cord must be disconnected from the player. Unplug the
player and insert six size D (R20) batteries (not supplied)
in the compartment.
When to replace the batteries
Replace the batteries when the OPR/BATT indicator dims
or when the player stops operating.
When the batteries are weak, replace all the batteries with
new ones.