Using The Tuner; Tuning In A Station - JVC MX-KB1 MX-KB2 Instructions Manual

Using the Tuner

FM/AM
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
❏ Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See page 4 and 5).
Setting the Tuner Interval Spacing
When shipped, the FM tuner interval is set to 100kHz spacing and
the AM tuner interval is set to 10kHz spacing. You can change the
FM or AM tuner interval spacing individually.
Changing the FM tuner interval spacing
When the system is in the FM mode, each time you hold down the
7 button and press the SOUND MODE button, the "FM 50kHz"
and "FM 100kHz" appears on the display alternately and the FM
tuner interval spacing is switched.
Changing the AM tuner interval spacing
When the system is in the AM mode, each time you hold down the
7 button and press the SOUND MODE button, the "AM 9kHz"
and "AM 10kHz" appears on the display alternately and the AM
tuner interval spacing is switched.
One Touch Radio
Just press the FM/AM button to turn on the System and start play-
ing the station you were last tuned to.
❏ You can switch from any other sound source to the radio by
pressing the FM/AM button.
9
Numeric keys
FM MODE
FM/AM
SET
22
¡
Band display, Frequency display, Preset number
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
FM mode indicators

Tuning In a Station

1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number and frequency appear.)
Each time you press the button, the band alternates between
FM and AM.
(on the Unit)
¢
4
or
(on the Remote Control)