Scanning From Application; How To Scan - Toshiba e-studio2007 User Manual

4 SCAN FUNCTIONS

Scanning From Application

This equipment supports scanning from TWAIN-compatible applications. TWAIN is the standard that links applications and
scanners that acquire images. For TWAIN support, see your application's manual.
Before you start scanning with this equipment, make sure that you have installed the scanner driver. For details, refer to
the Software Installation Guide.
 Scanning cannot be performed from a computer immediately after the power is turned ON, the buttons are pressed
or the covers are opened/closed in the equipment. Do it 30 seconds after "Ready" has appeared on the LCD
screen on the control panel.
 The default original size depends on the measurement system on Windows: A4 for Metric or LT for U.S.. You can
change the default only before the first execution after installation. For the measurement system, see the Windows
Help.
 P.98 "How to scan"
 How to scan
Follow the steps below to scan the original.
1
Place the original(s).
 P.35 "Placing originals on the original glass"
 P.36 "Placing originals on the Reversing Automatic Document Feeder"
2
Run your TWAIN-compatible application and execute the image acquisition command.
You can usually execute the scan or image acquisition command on the [File] menu to select this equipment. The
location of the command and the method to select the scanner vary depending on the application. See your
application's manual.
3
Set the scan settings.
 You can make various options to scan the original image.
 P.100 "Scan options"
 You can also make the scan settings using the Easy Set feature.
 P.103 "Using the Easy Set feature"
4
Click [Pre-Scan] to preview the original.
If you are not satisfied with the preview image, change the scan settings and preview the image again.
5
Click [Scan] to scan the original.
While scanning, you can stop scanning by clicking [CANCEL].
98

Scanning From Application