Preparation; Components; Front/Left Side/Inner Side - Toshiba e-studio2007 User Manual

1 PREPARATION

Components

 Front/Left side/Inner side
1. Reversing Automatic Document Feeder (RADF) (optional)
The stack of originals is scanned one sheet at a time. Both sides of the originals can be scanned. A maximum of 50
2
sheets (80 g/m or 20 lb. Bond) can be placed in one go. (The maximum number of sheets that can be set may vary
depending on the media type of the originals.)
 P.139 "Paper Misfeed"
2. Platen sheet
 P.154 "Regular Cleaning"
3. Original glass
Place the book-type originals and special paper such as overhead transparencies or tracing paper, as well as plain
paper.
4. Control panel
Make settings to use the various functions on this equipment.
 P.14 "Control panel"
5. Toner cartridge
For the recommended toner cartridges, refer to the Safety Information.
 P.148 "Replacing Toner Cartridge"
6. Front cover
Open this when you replace the toner cartridge.
 P.148 "Replacing Toner Cartridge"
7. Drawer
Place up to 250 sheets of plain paper (80 g/m
 P.22 "Loading paper in the drawer/Paper Feed Unit"
8. Paper Feed Unit (optional)
Use the Paper Feed Unit to add the second drawer. A maximum of 250 sheets (80 g/m
can be placed in one go.
9. Paper Feed Pedestal (optional)
Use the Paper Feed Pedestal to add one drawer. The Drawer Module can be installed in this device. A maximum of
550 sheets (80 g/m2 or 20 lb. Bond) can be placed in one go.
10

Components

19
18
17
16
15
14
13
12
11
2
or 20 lb. Bond).
1
2
3
4
5
6
7
8
9
10
2
or 20 lb. Bond) of plain paper