Set Stations - JVC HR-J435EK Instructions Manual

36
1
4
7
PUSH JOG
USING THE CONFIRMATION SCREEN (cont.)
6
q
2
2 3
5 6
8 9
0
OK
Perform steps 1 and 2 on page 34 to access the Confirmation
screen before continuing.
Set Stations (A)
SELECT ITEM
1
Press PUSH JOG%fi
blinking. Then press OK twice and the station's name
(ID) begins blinking.
SELECT NEW STATION
2
Press PUSH JOG %fi until the new station's name (ID)
you want to store begins blinking.
Registered station names (
press PUSH JOG %fi .
SWITCH STATIONS
3
Press OK.
Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION
SCREEN
4
Press CH SET.
Set Stations (B)
NOTE:
First perform step 1 of the above procedure.
SELECT STATION NAME
CHARACTER
2
Press PUSH JOG and the first letter of the station
name begins blinking.
ENTER NEW CHARACTER
3
Press PUSH JOG %fi to cycle through the characters
*
(A–Z, 0–9, –, , +, (space) ) and stop when the
desired one is indicated, then press PUSH JOG
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.
Repeat steps 1 through 3 as necessary.
If you make a mistake, press PUSH JOG
incorrect character begins blinking. Then enter the
correct character by pressing PUSH JOG %fi .
CLOSE CONFIRMATION
SCREEN
4
Press CH SET.
until the item you want begins
pg. 38) appear as you
to
until the