Marantz SR6009 Owner's Manual page 79

Contents Connections
Listening to FM/AM broadcasts
1
Connect the antenna. ("Connecting an FM/AM
antenna" (v p. 55))
2
Press TUNER to switch the input source to "Tuner".
G TV screen H
TUNER
CH 1
Tune
TUNE+/- TUNE+/-
G Display of this unit H
3
Press OPTION.
The option menu screen is displayed.
4
Use ui to select "FM/AM", then press ENTER.
This displays the reception band input screen.
Front panel Display
Playback
STEREO AUTO
Now Playing
FM 87.50MHz
Preset Option
CH / CH / OPTION OPTION
Rear panel
Settings
5
Use o p to select "FM" or "AM", then press ENTER.
FM: When listening to an FM broadcast.
AM: When listening to an AM broadcast.
6
Press TUNE + or TUNE - to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in using
buttons to change the frequency. The default setting is "Auto". You can also use
"Direct Tune" to tune in by entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the "Manual" mode or "Direct Tune" mode to tune in.
Operation buttons
TUNE +, –
CH/PAGE d f
79 Remote
Tips Appendix
Function
Selects the radio station (up/down)
Selects preset radio stations
Index