Panasonic EB-GD30 Service Manual page 28

DISASSEMBLY / REASSEMBLY INSTRUCTIONS
3. Gently bend the four Display Assembly lugs to allow removal from the Keypad PCB.
4.2.4 Case-Mounted Components
1. Remove the keypad by peeling it away from the case front.
2. Remove the rubber boot which contains the microphone. When refitting, ensure contacts are oriented such that they make
contact with the corresponding printed circuit pads on the Main PCB..
Issue 1
Revision 0
Figure 4.7: Display Assembly removal
Figure 4.8: Removing the keypad
Figure 4.9: Microphone assembly removal
Section 4
– 22 –
MCUK991001C8
Service Manual