Important For Laser Products - JVC FS-SD770 Instructions Manual

Compact component system
Hide thumbs Also See for FS-SD770:
Table of Contents

Advertisement

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS
1 CLASSIFICATION LABEL, PLACED ON EXTERIOR
SURFACE
CLASS
LASER
2 WARNING LABEL, PLACED INSIDE THE UNIT
1 CLASS 1 LASER PRODUCT
2 DANGER: Invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3 CAUTION: Do not open the top cover. There are no user ser-
viceable parts inside the Unit; leave all servicing to qualified
service personnel.
% switch!
%
%
%
Caution —
Disconnect the mains plug to shut the power off completely.
The
switch in any position does not disconnect the mains
line. The power can be remote controlled.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1
Do not remove screws, covers or cabinet.
2
Do not expose this appliance to rain or moisture.
Front view
15 cm
15 cm
CAUTION
About the Internal Cooling Fan
This unit includes an internal cooling fan, so as to allow for high-power operation within a small space.
This fan comes on when the sound level is set high, and may also come on even at low sound levels if the internal temperature rises. To ensure
effective fan operation, please leave at least 15cm clearance between the rear of the unit and the wall, and at least 1cm clearance on each side of
G-1
Warnings, Cautions and Others
1
PRODUCT
1 cm
STANDBY/ON
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage,
locate the apparatus as follows:
1
Front:
2
Sides/ Top/ Back:No obstructions should be placed in the
3
Bottom:
SAFETY PRECAUTIONS
Prevention of Electric Shocks, Fire Hazards and Damage
1
Even when the
current will flow. To save power and for safety when not
using the unit for an extended period of time, disconnect
the power cord from the household AC outlet.
2
Do not handle the power cord with wet hands.
3
When unplugging from the wall outlet, always grasp and
pull the plug, not the power cord.
4
Consult your nearest dealer when damage, disconnection,
or contact failure affects the cord.
5
Do not bend the cord severely, or pull or twist it.
6
Do not modify the power cord in any manner.
7
To avoid accidents, do not remove screws to disassemble
the unit and do not touch anything inside the unit.
8
Do not insert any metallic objects into the unit.
9
Unplug the power cord when there is a possibility of lightning.
10 Do not use this apparatus in a bathroom or places with water.
Also do not place any containers filled with water or liquids
(such as cosmetics or medicines, flower vases, potted plants,
cups, etc.) on top of this apparatus.
11 Do not block the ventilation opcnings or holes. (If the venti-
lation openings or holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)
12 Do not place any naked flame sources, such as lighted
candles, on the apparatus.
13 When discarding batteries, environmental problems must
be considered and local rules or laws governing the dis-
posal of these batteries must be followed strictly.
1 cm
15 cm
OPEN/CLOSE
PHONES
10 cm
No obstructions and open spacing.
areas shown by the dimensions below.
Place on the level surface. Maintain an
adequate air path for ventilation by plac-
ing on a stand with a height of 10 cm or
more.
%
button is set to STANDBY, a very small
Side view
15 cm
15 cm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents