Note In Lens Frame Installation; Notes On Handling The Laser Diode; [Laser Unit (D333)] - Sony DSC-V1 Service Manual

DSC-V1
1-3. NOTE IN LENS FRAME
INSTALLATION
When tightening a screw, have both sides of the lens block assembly
so as not for the load to depend.
Lens block assembly

1-4. NOTES ON HANDLING THE LASER DIODE

[LASER UNIT (D333)]

The laser diode may suffer electrostatic breakdown because of the
potential difference generated by the charged electrostatic load, etc.
on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
Lens holder
P2 × 4
Note: Adjustment is needed when laser unit (D333) is replaced.
Refer to "16. Hologram AF Data Input" and "17. Hologram
AF Angle Check" of SERVICE MANUAL, ADJ
(987626151.pdf).
Laser unit
(D333)
1-2