----------------- Installation
PC BIOS Notice
The following BIOS setup changes are necessary for
PC users and not necessary for Mac users:
1. In STANDARD CMOS, set HALT ON ERROR to
ALL BUT KEYBOARD.
2. In PNP AND PCI SETUP, set PNP OS INSTALLED
to YES and set USB IRQ to ENABLED.
Note: The DAG switch is applicable for USB keyboard
and mouse switching from one computer to the
other.
such as a CCD camera, printer or scanner, it is
required to shut down the driver of the computer
before
Because
unplugging the USB cable from one computer
and plugging it to another one, some USB
drivers check attached USB peripherals all the
time and do not accept plug-n-play function.
If you plan to share other peripherals
switching
port
switching
to
another
is
4
computer.
equivalent
to