Table of Contents
Advertisement
Table of Contents
Overview...............................................................1
Features................................................................2
Configurations.........................................................3
Console Connection..................................................5
Server Connection....................................................6
Initial Power-up........................................................8
Hot-key Commands...................................................9
PS/2 to Sun Keyboard Mapping.................................11
Connection..........................................................13
Change Configuration while Running..........................14
Specifications..........................................................15
Troubleshooting......................................................16
Please read this manual thoroughly and f ollow the
Installation procedures to prevent any damage to the
Integra system or any connecting dev ice.
Advertisement
Table of Contents
Related Manuals for Rextron INTEGRA KVM2
Summary of Contents for Rextron INTEGRA KVM2
-
Page 1: Table Of Contents
Table of Contents Integra Sun KVM Switches ■ ■ ■ ■ Introduction Overview……………………………………..…….…………1 Features………………………………………..………….….2 Configurations………………….………………..…………...3 ■ ■ ■ ■ Installation Console Connection…………………..……...…………..….5 Server Connection…………………..…………..……..…..6 Initial Power-up…………………..………………..….……...8 ■ ■ ■ ■ Operation Hot-key Commands…………………………..………..…..9 PS/2 to Sun Keyboard Mapping…………………………...11 ■ ■ ■ ■ Cascade Configuration Connection………….………………………….….….…...13 Change Configuration while Running………..………..….14 ■... -
Page 2: Integra Sun Kvm Switches
Integra Sun KVM Switch Integra Sun KVM Switch Introduction Introduction Introduction Introduction Features ------------------------ ------------------------ ------------------------ ------------------------ Manage 8 Sun servers with one or two sets of keyboards, mice Overview and monitors Two-tier cascade conf iguration expands system capability One-Console Sun KVM Switch Auto-scan automatically selects serv ers sequentially Hot-key functions allow easy serv er access The combination of Integra Console and a Sun KVM switch offers the... -
Page 3: Configurations
Integra Sun KVM Switch Integra Sun KVM Switch Configurations Cascade (Master/Slave) Configuration Integra Sun KVM switches are available in 1-console- and 2-console- You can connect a second level of one or more Sun KVM Switches to to-8-port models to support a v ariety of requirements. For applications "PC 1"~”PC 8”... -
Page 4: Installation
Integra Sun KVM Switch Integra Sun KVM Switch Installation Installation Installation Installation ------------------------ ------------------------ ------------------------ ------------------------ Figu re 4: Make sure all servers and the KVM switch modules are powered down during installation. sole Console Connection nect To a KVM drawer: Just connect the C-36 connector from a TFT LCD KVM drawer to the Sun KVM switch module. -
Page 5: Initial Power-Up
Integra Sun KVM Switch Integra Sun KVM Switch For Sun serv ers with 13W3 v ideo output, a 13W3-to-HDB15 adapter Master Integra system before turning on any other devices. is required for such server's video port as shown in figure 6. For single Integra Sun KVM Switch: Apply a power adapter to the Master. -
Page 6: Ps/2 To Sun Keyboard Mapping
Integra Sun KVM Switch Integra Sun KVM Switch Hot-key commands are short keyboard sequences to select a server, selection stops f ollowing serv er selection. It is usef ul if y ou want to to activ ate serv er scan, etc. A Sun KVM switch interprets keystrokes listen to a particular serv er's audio signal while operating other f or hot-keys all the time. -
Page 7: Cascade Configuration
Integra Sun KVM Switch Integra Sun KVM Switch the lower-right CTRL f ollowed by one of the f unction keys (i.e. Combo Key). Refer to the following table f or the mapping. For instance, strike the CTRL then F7 to activate Open for a Sun serv er. Note: The second Combo Key must be entered in 3 seconds after the CTRL is pressed. -
Page 8: Connection
Integra Sun KVM Switch Integra Sun KVM Switch Connection Figure 9: Cascaded Before connecting a device (a server or a Slave KVM switch) to the port Integra Master Sun KVM Switch under power, you must turn off the device. Switches The ports "PC 1"~”PC 8”... -
Page 9: Troubleshooting
Integra Sun KVM Switch Integra Sun KVM Switch # of ports Sun server resolution from the Sun Set the video resol ution of the server Sun s er ver to 1024 x 768 Max capacity for Sun servers Special function Chec k the s ection Do not hold down the CTRL Keyboard/mouse emulation... - Page 10 Integra Sun KVM Switch Integra Sun KVM Switch The ↑ ↑ ↑ ↑ All PCs are off or onl y Turn servers on. ↓ ↓ ↓ ↓ There is no Incorrect 13W3-to- onl y adapter keys one PC is turned on. Press any other key to abort VGA output HDB15 pi n...
-
Page 11: Limited Warranty
All the brand names and registered trademarks are the property of their respective Ctrl 2 owners. Ctrl 3 Ctrl 4 Ctrl H Help Right ♦ Right W indow Left W indow Left ♦ Context key Compose Right Alt Alt Graph Copyright 04/2002 Rextron Tec hnology, Inc. PP5-S1600-000 Printed in Tai wan...