Access Control Of Wireless Lan Interface - Draytek Vigor2600 Quick Start Manual

Access Control of
Wireless LAN
Interface
Enable Acces Control: To check the Enable Access Control to enable the MAC
Address access control feature.
MAC Address: To type the specific MAC Address which could be added on, removed
from or edited from the access list above.
ADD: To add a MAC address on the list.
Remove: To remove the selected MAC address on the list.
Edit: To edit the selected MAC address on the list.
Cancel: To cancel the MAC address access control setup.
Clean All: To clean all of configured MAC address on the list.
OK: To save the access control list.
For additional security of wireless access, the Access Control allows your to restrict the
network access rights by the wireless LAN MAC address of client. Only the valid MAC
address which has been configured can allow to access the wireless LAN interface.
18