Ipv4 Configuration Using Setip (Mac) - Samsung ProXpress M337 series User Manual

Wired network setup
1 Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
2 Follow the instructions in the installation window.
3 Connect your machine to the network with a network cable.
Turn on the machine.
4
From the Windows Start menu, select All Programs > Samsung
5
Printers > SetIP > SetIP.
6 Click the icon in the SetIP window to open the TCP/IP configuration
window.
7 Enter the machine's new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine's MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 175) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8 Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.

IPv4 configuration using SetIP (Mac)

Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
The following instructions may vary from your model.
1 Connect your machine to the network with a network cable.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your Mac desktop.
• For Mac OS X 10.8, Double-click the CD-ROM that appears on Finder.
4 Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
5
Read the license agreement and click Continue.
6
7 Click Agree to agree to the license agreement.
2. Using a Network-Connected Machine
176