Ipv4 Configuration Using Setip (Linux) - Samsung Multifunction Xpress C48 series User Manual

Wired network setup
7 Enter the machine's new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine's MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 144) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8 Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
IPv4 configuration using SetIP (Mac)
Before using the SetIP program, disable the computer firewall from System
Preferences > Security (or Security & Privacy) > Firewall.
1 Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
Turn on the machine.
2
3 Run downloaded SetIP application.
4 Click the icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
5 Enter the machine's new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine's MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 144) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
Click Apply, and then click OK. The machine will automatically print the
6
Network Configuration Report. Confirm that all the settings are
correct.

IPv4 configuration using SetIP (Linux)

Before using the SetIP program, disable the computer firewall from System
Preferences or Administrator.
The following instructions may vary from your model or operating systems.
2. Using a Network-Connected Machine
145