Page 2
ENVIRONMENTAL RECEPTION EFFECTS Your radio controlled clock obtains the accurate time with wireless technology. Same as All wireless devices, the receiving ability maybe affected by, but not limited to, the following circumstances: Long transmitting distance Nearby mountains and valleys Among tall buildings Near railway, high voltage cable etc.
Page 3
Weak or no DCF signal (only icon flashing) Receiving strong DCF signal icon flashing) Successful Reception icon becomes static) Failed Reception icon disappear) Remark : when your clock is receiving radio controlled time signal, all buttons except the snooze / light button do not function.
Page 4
8. Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 30 seconds if no press of any other buttons. TO SET ALARM TIME 1. Press SET / ALM SET once, time digits change to alarm time digits “0:00 AL”. Then press and hold SET / ALM SET for 2 seconds, the alarm hour digits flash.
Page 5
WEATHER FORECASTER ICON AND PRESSURE TREND INDICATOR Your weather station has a built-in barometric sensor which measures the change of the air pressure over time. Your weather station takes around 24 hours to gather and average air- pressure readings to provide a weather forecast for next 12-24 hours.
Page 6
When the maximums or minimums are displayed, press and hold the MAX-MIN button to reset both records and it will start to record the maximums and minimums again. IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY When the outdoor temperature and humidity digits show '---", the wireless transmission is either interrupted or lost.
Page 7
SPECIFICATIONS: Temperature Range Indoor +32F to +113F (0C to +50C) (display shows HH.H / LL.L if out of this range) Outdoor -4F to +158F (-20C to +70C) (display shows HH.H / LL.L if out of this range) Humidity Range Indoor 20% - 95% Outdoor 20% - 95%...
Need help?
Do you have a question about the WS 7019 and is the answer not in the manual?
Questions and answers