Sony Trinitron KV-ES29M90 Service Manual page 46

KV-ES29M90
RM-916
5-2. ADJUSTMENT METHOD
Item Number 00 of device GEO
This explanation uses H-Position as an example.
1. Select "GEO 00 VSZ" with the 1 and 4 buttons.
2. Raise/lower the data with the 3 and 6 buttons.
3. Select the optimum state. (The standard is 1F for PAL reception.)
4. Write with the
WRITE.)
5. Execute the writing with the - button. (The WRITE
display will be changed to red color while excuting, and back
to SERVICE.)
GEO 00 HPS
0 012Q 1.2M
GEO 00 HPS
0 012Q 1.2M
Written with [MUTING]
GEO 00 HPS
0 012Q 1.2M
Write executed with [0]
http://cxema.ru
[MUTING]
button. (The display changes to
29 SERVICE 50 GREEN
59 FF 0 000A
Adjusted with [3]
and [6] buttons.
GREEN
1F WRITE 50
59 FF 0 000A
1F SERVICE 50 RED
The WRITE display
59 FF 0 000A
then the display
returns to a green
SERVICE.
Use the same method for all Items. Use 1 and 4 to select the
adjustment item, use 3 and 6 to adjust, write with
then execute the write with -.
[WRITE]
Note : 1. In , the data for all items are written into memory
together.
2. For adjustment items that have different standard data
between 50Hz or 60Hz, be sure to use the respective
input signal after adjustment.
3. Additional function to skip category (device) to category
(device).
example:
GEO 00
↕
DAC 00
The buttons for the function above should be cursor +/–.
– 46 –
[MUTING]
HPS
XXX
,