Product Specifi Cations; Fcc And Ic Statement - XM XMp3 Installation Manual

Product Specifi cations
Dimensions
Car Cradle
XM Car Antenna
Audio Cable
Remote Control
Weight
Car Cradle
Antenna
Remote
Audio Outputs
External Power
Voltage
Current
Polarity
Remote Battery
Type
Voltage
Model Numbers
XMp3 Radio
XMp3 Home Kit
XMp3 Car Kit
26
53 mm (W) X 70 mm (H) X 35 mm (D)
2 in (W) X 2.75 in (H) X 1.37 in(D)
Cable Length: 23 feet (7 m)
Cable Length: 1 meter with standard 3.5mm
stereo plug on each end
40 mm (W) X 119 mm (H) X 14 mm (D)
1.5 in (W) X 4.7 in (H) X 0.55 in(D)
48 g 1.7 oz
85 g 3 oz
60 g 2 oz
3.5 mm diameter mini stereo jack
5V DC
2000 mA
CR2032
3 V
GEX-XMP3-C
CD-XMHOME1-C
CD-XMPCAR1-C

FCC and IC Statement

The user is cautioned that changes or modifi cations not expressly approved by XM Satellite Radio Inc. can void
the user's authority to operate this device.
This device has been designed to operate with the antenna provided in the original packaging. Use of antenna
other than the antenna provided will result in improper operation, and is strictly prohibited per regulations of
Industry Canada.
This device complies with Part 15 of the FCC Rules and is certifi ed to Industry Canada's RSS-210 specifi cation:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules and Industry Canada RSS-210. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the installation instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna of the aff ected receiver.
• Increase the separation between the XM equipment and the aff ected receiver.
• Connect the XM equipment into an outlet on a circuit diff erent from that to which
the aff ected receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! The FCC and FAA have not certifi ed this Satellite Radio Receiver for use in any aircraft (neither portable
nor permanent installation). Therefore, XM Satellite Radio cannot support this type of application or installation
27