Table of Contents
Advertisement
The IR IN 3.5 mm stereo jack on the rear panel of the STB-2000 provides an input for an optional external
IR receiver (Example: Sung Nam Electronics EAD61273113). The jack provides external IR VCC of 3.5
volts. Refer to the following diagram for pinout details.
Caution: Do NOT plug in a mono connector, as this may damage the STB.
206-4256
Reference: External IR Receiver Specifications
1
+3.5 v (VCC)
2
OUTPUT VOLTAGE (VOUT)
3
GND
IR IN
3
1
2
77
Advertisement
Table of Contents
