Table of Contents
Advertisement
Installer Menu (Cont.)
Installer Menu Items 073 through 122
Item
Function
073
CH NOT AVBLE
075
REVERT CH
078
UPN MSB
079
UPN MSB-1
080
UPN MSB-2
081
UPN LSB
082
CHKSM ERROR
083
HANDSHK TIME
084
PERMANENT BLK
V. MUTE TIME
086
088
EN NOISE MUTE
090
KEY LOCK
091
HDMI2 ENABLE
094
SAP MENU EN
096
DEF. ASP. RATIO
097
AUDIO OUTPUT
098
PRO:CENTRIC
100
VIDEO INTERFAC
102
ATSC BAND
103
ATSC TUNE MODE
104
START MINOR CH
105
VID OUT FORMAT
106
ASP RATIO LOCK
108
PANEL COM
110
PANEL DELAY
113
PANEL TYPE
116
VIDEO MUTE EN
117
FACT DEFAULT
119
DATA CHANNEL
121
UPDATE TIME HR
122
UPDATE TIME MN
28
Value Range
Default Value
0 / 1
0
0 / 1
0
0 ~ 255
0
0 ~ 255
0
0 ~ 255
0
0 ~ 255
0
0 / 1
1
0 ~ 5
5
0 / 1
0
0 ~ 50
0
0 / 1
1
0 / 1
1
0 ~ 2
1
0 / 1
1
0 ~ 4
2
0 / 9
9
0 ~ 3
0
3 ~ 5
3
0 ~ 4
4
0 / 1
1
0 ~ 255
0
1, 4, 5
1
0 / 1
0
0 ~ 3
2
0 ~ 15
8
0 ~ 4
4
0 / 1
0
0 / 1
0
0 ~ 135, 253,
255
255
0 ~ 23, 128
128
0 ~ 59, 255
0
Brief Description of Function
If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT
AVAILABLE" message is displayed if user attempts to direct tune a channel that
is not included in the channel lineup.
If set to 1 and loss of MPI communication occurs, STB tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-
Removes block hours setting for Parental Control and makes block permanent.
Use to extend the normal video mute time during channel change.
(Analog channels only) If set to 1, audio is muted if no signal is present.
If set to 1, all LG Hospitality and commercial non-LG display panel button
functions are locked. N/A for LG Public Displays or LG Commercial Monitors.
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
Set to 1 to enable SAP feature in Function Menu.
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Set as required in accordance with external audio equipment connected to the
STB. (See detailed descriptions.)
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode. Set to 3 for HTML Mode.
Selects HDMI connection for display panel: 3 = HDMI1, 4 = HDMI2, 5 = HDMI3
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
Sets format for video output: 1 = 720p, 4 = 1080p, 5 = 1366 x 768
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
Sets display panel baud rate: 0 = 1200, 1 = 2400, 2 = 9600, 3 = 115200
Sets the display panel communication delay time.
Selects display panel type. (See detailed descriptions.)
(Analog channels only) If set to 1, video mutes (blank screen) when no
Set to 1 to restore the factory default settings of all Installer Menu items.
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by
the Pro:Centric server as its data channel. Set to 255 to use Auto Search to find
the Pro:Centric RF channel. (See detailed descriptions.)
Sets the Wake For Update hour. The value "128" is displayed as "OFF." Directly
entering 128 turns the Wake For Update feature OFF.
Sets the minute for Wake For Update. (See detailed descriptions.)
controlled systems.
Selects ATSC band.
power cycle.
signal is present.
206-4256
Advertisement
Table of Contents
