Alfa Romeo 156 GTA Owner's Manual page 191

– Refit the bulb holder (A-fig. 31) by
making its notches coincide with the grooves
in the headlight unit body and turn it clock-
wise.
190
fig. 31
DIPPED-BEAM HEADLAMPS
(fig. 32)
To replace the bulb proceed as follows:
– Remove the protective cover
– Disconnect the electrical connector (A).
– Release the bulb catch (B).
– Withdraw the bulb and replace it.
– Fit the new bulb making the tabs of the
metallic part coincide with the grooves in the
headlamp lens and hook the bulb catch (B).
– Reconnect the electrical connector (A).
– Refit the protective cover correctly.
A0B0221m
fig. 32
FRONT FOG LIGHTS
To replace the bulb proceed under the car
as follows:
– Loosen the screw (A-fig. 33) and re-
move the protection cover (B).
– Release catch (C-fig. 34) and dis-
connect connector(D) from the light unit.
– Turn cover (E) counterclockwise and re-
move it.
– Withdraw the supply cable terminal (F-
fig. 35).
– Release the bulb stopper (G) and re-
move the bulb.
A0B0222m
fig. 33
A0B0319m