GENERAL INSTRUCTIONS
– When a light is not working check the
corresponding fuse is intact before replacing
the bulb.
– For the location of fuses, refer to the
paragraph "In the event of a burnt fuse"
in this chapter.
– Before changing a bulb check the con-
tacts for oxidation.
– Burnt bulbs must be replaced with oth-
ers of the same type and power.
– Always check the height of the headlight
beam after changing a bulb to ensure they
are safe.
IMPORTANT On the inside surface of
the headlight there could appear a slight
coat of fogging; this does not show a defect,
since it is a natural occurrence due to low
temperature and to the degree of humidity
in the air; it will soon disappear as soon as
the lights are turned on. The presence of
drops inside the headlight shows water seep-
age, refer to an Alfa Romeo Authorized
Service.
184
TYPES OF BULBS (fig. 20)
Various types of bulbs are fitted to your ve-
hicle:
A.
All glass bulbs
They are pressure-fitted. Pull to re-
move.
B.
Bayonet type bulbs
Press the bulb, turn counter-clockwise
to remove this type of bulb from its
holder.
C.
Tubular bulbs
Free them from their contacts to re-
move.
D.
Halogen bulbs
To remove free it from the clip on its
seating.
fig. 20
A0B0233m