Removing And Reinstalling The Main Parts - Sharp CD-K491W Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

CD MECHANISM SECTION
Perform steps 1, 2, 3,16, 17, 18, 19 and 20 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor
(See Fig. 11-1)
1. Remove the screws (A1) x 2 pcs., to remove the loading
motor.
How to remove the pickup (See Fig. 11-2)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2).
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4).
3. Remove the pickup.
Loading/Up/
Down Motor
Motor
PWB
( B1 ) x2
ø2.6 x6mm
Shaft
( B2 ) x1
– 11 –
CD-K491W
( A1 ) x2
ø2.6 x5mm
Figure 11-1
Stop Washer
( B3 ) x1
Pickup
CD Mechanism
Gear
( B4 ) x1
Figure 11-2