Dots Appear And Remain On The Screen; You Cannot Shoot Images Continuously; The Corners Of The Picture Are Too Dark - Sony ILCE-5100 User Manual

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.
[268] Troubleshooting

You cannot shoot images continuously.

The memory card is full. Delete unnecessary images.
The battery level is low. Insert a charged battery pack.
[269] Troubleshooting
The image is whitish (Flare)./Blurring of light appears on
the image (Ghosting).
When pointing the lens toward the strong light source, excessive light enters the lens and
the image may come out white (flare) or extraneous light (ghost images) may appear on
the image, but this is not a malfunction.
When using the zoom lens, attach the lens hood.
Also, set up the composition so that you shoot images while avoiding backlit condition.
[270] Troubleshooting

The corners of the picture are too dark.

If any filter or hood is used, take it off and try shooting again. Depending on the thickness
of the filter and improper attachment of the hood, the filter or the hood may partially
appear in the image. The optical properties of some lenses may cause the periphery of
the image to appear too dark (insufficient light). You may compensate for this
phenomenon with [Shading Comp.].
Troubleshooting
Troubleshooting
Troubleshooting
Shooting still images/movies
Shooting still images/movies
Shooting still images/movies