Pwr Save Start Time; Pal/Ntsc Selector - Sony ILCE-5100 User Manual

[Cancel] is selected as the default setting.
[163] How to Use

Pwr Save Start Time

You can set time intervals to automatically switch to power save mode. To return to shooting
mode, perform an operation such as pressing the shutter button halfway down.
1. MENU →
Menu item details
30 Min/5 Min/2 Min/1 Min (default setting)/10 Sec
Note
Turn off the product when you do not use it for a long time.
The power save function is not activated during playing back slideshow or recording
movies, or when connected to a computer.
[164] How to Use

PAL/NTSC Selector

Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU →
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a "50i" mark on the
bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the "Running on NTSC." message always appears on
the start-up screen each time you turn the product on.
Changing settings
(Setup) → [Pwr Save Start Time] → desired setting.
Changing settings
(Setup) → [PAL/NTSC Selector] → [Enter]
Setup menu
Setup menu