Management And Setup Menu - Nautilus Be Strong Commerical T912 Service Manual

Management and Setup Menu -

Table 2–6. Management and Setup Menu
Step No. Press Keys on Console
1 SPEED UP AND SPEED DOWN
for 3 secs
2 ENTER
3 SPEED UP OR SPEED DOWN
4 ENTER
5 STOP
Model T914 & T916
There are seven groups of console codes for Models T914 and T916 as follows:
• Cardio (codes starting with 2),
• Owner-Defined Custom (codes starting with 3),
• Machine Status (codes starting with 4),
• R and D (codes starting with 5) FACTORY TEST only,
• Diagnostic (codes starting with 6),
• Maintenance Logs (codes starting with 7), and
• Change Machine (codes starting with 8).
Each group of codes is defined below by quick reference guides (Console Cardio Codes and T914/T916
Service Screen Overview) and detailed instruction sections. To access these console codes and the
options within each group, follow the instructions for each section.
SECTION 2: CONSOLE CODES
Display (What you will see)
Total Hours
Moves into next selection (Maximum Speed, Maximum Work-
out Time, Mag Key Limited Access Control, Units: English or
Metric, Language Selection)
Scrolls between values
Enters value
Exits setup
Nautilus® Commercial T9 Series Treadmill Service Manual
19