Motherboard Manual
JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.
JUSBV1/JUSBV2: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSBLAN1.
JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: USB ports at JUSBLAN1 are powered by +5V standby voltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby voltage.
Note:
In order to support this function "Power-On system via USB device," "JUSBV1/ JUSBV2"
jumper cap should be placed on Pin 2-3 individually.
14
Pin
1
2
3
4
5
6
7
JUSB2 JUSB3
8
9
10
10
2
9
1
1
JUSBV1
1
Pin 1-2 close
3
1
1
3
Pin 2-3 close
JUSBV2
Assignment
+5V (fused)
+5V (fused)
USB-
USB-
USB+
USB+
Ground
Ground
Key
NC
1
3
3
1
3
3