Ilink Layout Summary - Mitel iLink Installation & User Manual

iLink Layout Summary

:
Front of Unit
888.664.3366
CHANNEL A & B - Depending upon the MODE these multi-color LED's will indicate unit status or volume
control settings.
VOLUME - The primary function of these buttons is to control the output volume of the iLink as well as the
BGM feedthrough level. The secondary function of these is to initiate a forced connection back to the dealers
server as well as resetting the system.
MODE - This button places the iLink in different configuration modes that control server connection, unit reset,
formatting and volume control functions.
Rear of Unit
LAN - This jack connects to the local Ethernet that allows the iLink connectivity to the Internet. The jack also has
two built in LEDs that report back network activity and speed status.
CHANNEL A or B (IN) - This signal level jack allows an external BGM (Background Music) source to be fed
through the iLink unit.
CHANNEL A or B (OUT) - This jack connects to a phone systems MOH input or a PA amplifier.
8Ω or 600 - This switch changes the output impedance of the CHANNEL A or B (OUT) jack.
POWER - Use this switch to turn the unit ON and OFF.
12VDC - This is where the supplied 12VDC @ 500mA power pack is connected.
4