Knife Position Crosswise To Sewing Direciton - Pfaff 471 Instruction Manual

11. Knife position crosswise to sewing direction
06.02
Requirement
When the edge trimmer is engaged, knife 2 must be vertical and rest lightly on the needle
plate insert.
2
Fig. 11 - 39
Switch off the machine and engage the edge trimmer.
Bring the knife into a vertical postion by turning milled screw 1.
Bring knife 2 into light contact with the needle plate insert and tighten screw 3.
The cutting pressure can be adapted to the material used with milled screw 1.
-
3
Adjustment
+
1
11 - 43